<sub id="qgjub"><listing id="qgjub"><small id="qgjub"></small></listing></sub>
        <form id="qgjub"><th id="qgjub"></th></form>
        <var id="qgjub"></var>
        <nav id="qgjub"><listing id="qgjub"></listing></nav>

        <button id="qgjub"></button>
        <form id="qgjub"><pre id="qgjub"><noscript id="qgjub"></noscript></pre></form>
        1. 全國咨詢服務熱線:400-6700-720 / 020-38937005

          熱門關鍵詞: GELOY PC/ASA HRA222 Victrex PEEK 450CA30 cycoloy pc/abs-XCY620-BK1005

          當前位置:主頁 > 產品中心 > Cycoloy PC/ABS > CYCOLOY > PC/ABS >

          Cycoloy PC/ABS C6600-111

          2015-12-21 15:44

          Cycoloy PC/ABS C6600物性

          無溴無氯阻燃的PC + ABS合金,標準流動,耐水解.

          Property
           
          TYPICAL PROPERTIES (1)
          MECHANICAL
          Value Unit Standard
          Tensile Stress, yld, Type I, 50 mm/min
          640
          kgf/cm²
          ASTM D 638
          Tensile Stress, brk, Type I, 50 mm/min
          490
          kgf/cm²
          ASTM D 638
          Tensile Strain, yld, Type I, 50 mm/min
          4
          %
          ASTM D 638
          Tensile Strain, brk, Type I, 50 mm/min
          80
          %
          ASTM D 638
          Tensile Modulus, 50 mm/min
          30500
          kgf/cm²
          ASTM D 638
          Flexural Stress, yld, 1.3 mm/min, 50 mm span
          950
          kgf/cm²
          ASTM D 790
          Flexural Modulus, 1.3 mm/min, 50 mm span
          26700
          kgf/cm²
          ASTM D 790
          IMPACT
          Value Unit Standard
          Izod Impact, notched, 23°C
          56
          cm-kgf/cm
          ASTM D 256
          Instrumented Impact Total Energy, 23°C
          520
          cm-kgf
          ASTM D 3763
          Instrumented Impact Total Energy, -30°C
          520
          cm-kgf
          ASTM D 3763
          THERMAL
          Value Unit Standard
          Vicat Softening Temp, Rate B/50
          99
          °C
          ASTM D 1525
          HDT, 1.82 MPa, 3.2mm, unannealed
          83
          °C
          ASTM D 648
          HDT, 0.45 MPa, 6.4 mm, unannealed
          98
          °C
          ASTM D 648
          HDT, 1.82 MPa, 6.4 mm, unannealed
          90
          °C
          ASTM D 648
          Relative Temp Index, Elec
          80
          °C
          UL 746B
          Relative Temp Index, Mech w/impact
          70
          °C
          UL 746B
          Relative Temp Index, Mech w/o impact
          80
          °C
          UL 746B
          PHYSICAL
          Value Unit Standard
          Specific Gravity
          1.19
          -
          ASTM D 792
          Water Absorption, 24 hours
          0.11
          %
          ASTM D 570
          Mold Shrinkage, flow, 3.2 mm
          0.4 - 0.6
          %
          SABIC Method
          Melt Flow Rate, 260°C/2.16 kgf
          21.5
          g/10 min
          ASTM D 1238
          ELECTRICAL
          Value Unit Standard
          Volume Resistivity
          >1.E+15
          Ohm-cm
          IEC 60093
          Surface Resistivity, ROA
          >1.E+15
          Ohm
          IEC 60093
          Dielectric Strength, in oil, 3.2 mm
          17
          kV/mm
          IEC 60243-1
          Relative Permittivity, 50/60 Hz
          2.7
          -
          IEC 60250
          Relative Permittivity, 1 MHz
          2.7
          -
          IEC 60250
          Dissipation Factor, 50/60 Hz
          0.004
          -
          IEC 60250
          Dissipation Factor, 1 MHz
          0.006
          -
          IEC 60250
          FLAME CHARACTERISTICS
          Value Unit Standard
          UL Recognized, 94V-2 Flame Class Rating (3)
          0.75
          mm
          UL 94
          UL Recognized, 94V-0 Flame Class Rating (3)
          1.5
          mm
          UL 94
          UL Recognized, 94-5VB Rating (3)
          2
          mm
          UL 94
          Processing
           
          Parameter
          Injection Molding
          Value Unit
          Drying Temperature
          80 - 90
          °C
          Drying Time
          3 - 4
          hrs
          Drying Time (Cumulative)
          8
          hrs
          Maximum Moisture Content
          0.04
          %
          Melt Temperature
          245 - 275
          °C
          Nozzle Temperature
          245 - 275
          °C
          Front - Zone 3 Temperature
          245 - 275
          °C
          Middle - Zone 2 Temperature
          220 - 275
          °C
          Rear - Zone 1 Temperature
          220 - 255
          °C
          Mold Temperature
          60 - 80
          °C
          Back Pressure
          0.3 - 0.7
          MPa
          Screw Speed
          40 - 70
          rpm
          Shot to Cylinder Size
          30 - 80
          %
          Vent Depth
          0.038 - 0.076
          mm

          與塑擎合作

          您將會得到更成熟專業的工程塑料供應服務。我們以客戶至上,同時也積極挑戰,力求呈現最好的服務質量給廣大客戶。

          工程塑料熱線:

          400-6700-720
          020-38937005

          關于塑擎:
          东京一本一道一二三区,最新国产免费AV片在线观看,无遮无码免费裸交视频,美女裸体无遮挡18禁尤物