<sub id="qgjub"><listing id="qgjub"><small id="qgjub"></small></listing></sub>
        <form id="qgjub"><th id="qgjub"></th></form>
        <var id="qgjub"></var>
        <nav id="qgjub"><listing id="qgjub"></listing></nav>

        <button id="qgjub"></button>
        <form id="qgjub"><pre id="qgjub"><noscript id="qgjub"></noscript></pre></form>
        1. 全國咨詢服務熱線:400-6700-720 / 020-38937005

          熱門關鍵詞: GELOY PC/ASA HRA222 cycoloy pc/abs-XCY620-BK1005 Victrex PEEK 450CA30

          當前位置:主頁 > 產品中心 > Cycoloy PC/ABS > CYCOLOY > PC/ABS >

          cycoloy pc/abs-CH6410-701

          2015-12-16 14:59

          Cycoloy PC/ABS CH6410-701

          CH6410是高熱量,沖擊改良PC樹脂.無溴無氯阻燃,有顏色限制.

          Property
           
          TYPICAL PROPERTIES (1)
          MECHANICAL
          Value Unit Standard
          Tensile Stress, yld, Type I, 50 mm/min
          640
          kgf/cm²
          ASTM D 638
          Tensile Stress, brk, Type I, 50 mm/min
          550
          kgf/cm²
          ASTM D 638
          Tensile Strain, yld, Type I, 50 mm/min
          5.5
          %
          ASTM D 638
          Tensile Strain, brk, Type I, 50 mm/min
          88
          %
          ASTM D 638
          Tensile Modulus, 50 mm/min
          25900
          kgf/cm²
          ASTM D 638
          Flexural Stress, yld, 1.3 mm/min, 50 mm span
          970
          kgf/cm²
          ASTM D 790
          Flexural Modulus, 1.3 mm/min, 50 mm span
          26500
          kgf/cm²
          ASTM D 790
          Tensile Stress, yield, 50 mm/min
          63
          MPa
          ISO 527
          Tensile Stress, break, 50 mm/min
          55
          MPa
          ISO 527
          Tensile Strain, yield, 50 mm/min
          5
          %
          ISO 527
          Tensile Strain, break, 50 mm/min
          95
          %
          ISO 527
          Tensile Modulus, 1 mm/min
          2300
          MPa
          ISO 527
          Flexural Stress, yield, 2 mm/min
          90
          MPa
          ISO 178
          Flexural Modulus, 2 mm/min
          2400
          MPa
          ISO 178
          Hardness, H358/30
          100
          MPa
          ISO 2039-1
          IMPACT
          Value Unit Standard
          Izod Impact, notched, 23°C
          92
          cm-kgf/cm
          ASTM D 256
          Instrumented Impact Total Energy, 23°C
          740
          cm-kgf
          ASTM D 3763
          Izod Impact, notched 80*10*4 +23°C
          50
          kJ/m²
          ISO 180/1A
          Izod Impact, notched 80*10*4 0°C
          19
          kJ/m²
          ISO 180/1A
          Izod Impact, notched 80*10*4 -30°C
          15
          kJ/m²
          ISO 180/1A
          Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm
          55
          kJ/m²
          ISO 179/1eA
          Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm
          15
          kJ/m²
          ISO 179/1eA
          THERMAL
          Value Unit Standard
          HDT, 0.45 MPa, 3.2 mm, unannealed
          127
          °C
          ASTM D 648
          HDT, 1.82 MPa, 3.2mm, unannealed
          118
          °C
          ASTM D 648
          CTE, -40°C to 40°C, flow
          7.74E-05
          1/°C
          ASTM E 831
          CTE, -40°C to 40°C, xflow
          5.94E-05
          1/°C
          ASTM E 831
          CTE, 23°C to 60°C, flow
          7.E-05
          1/°C
          ISO 11359-2
          CTE, 23°C to 60°C, xflow
          7.E-05
          1/°C
          ISO 11359-2
          Ball Pressure Test, 125°C +/- 2°C
          PASSES
          -
          IEC 60695-10-2
          Vicat Softening Temp, Rate B/50
          134
          °C
          ISO 306
          Vicat Softening Temp, Rate B/120
          135
          °C
          ISO 306
          HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm
          126
          °C
          ISO 75/Be
          HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm
          113
          °C
          ISO 75/Ae
          PHYSICAL
          Value Unit Standard
          Specific Gravity
          1.19
          -
          ASTM D 792
          Mold Shrinkage on Tensile Bar, flow (2)
          0.05 - 0.07
          %
          SABIC Method
          Mold Shrinkage, flow, 3.2 mm
          0.4 - 0.5
          %
          SABIC Method
          Melt Flow Rate, 260°C/2.16 kgf
          6.3
          g/10 min
          ASTM D 1238
          Density
          1.2
          g/cm³
          ISO 1183
          Melt Volume Rate, MVR at 260°C/5.0 kg
          16
          cm³/10 min
          ISO 1133
          ELECTRICAL
          Value Unit Standard
          Volume Resistivity
          >1.E+15
          Ohm-cm
          IEC 60093
          Surface Resistivity, ROA
          >1.E+15
          Ohm
          IEC 60093
          Dielectric Strength, in oil, 3.2 mm
          18
          kV/mm
          IEC 60243-1
          Relative Permittivity, 50/60 Hz
          2.7
          -
          IEC 60250
          Relative Permittivity, 1 MHz
          2.7
          -
          IEC 60250
          Dissipation Factor, 50/60 Hz
          0.001
          -
          IEC 60250
          Dissipation Factor, 1 MHz
          0.01
          -
          IEC 60250
          Comparative Tracking Index
          225
          V
          IEC 60112
          FLAME CHARACTERISTICS
          Value Unit Standard
          UL Recognized, 94V-1 Flame Class Rating (3)
          0.99
          mm
          UL 94
          UL Recognized, 94V-0 Flame Class Rating (3)
          1.49
          mm
          UL 94
           
          Parameter
          Injection Molding
          Value Unit
          Drying Temperature
          90 - 100
          °C
          Drying Time
          2 - 4
          hrs
          Drying Time (Cumulative)
          8
          hrs
          Maximum Moisture Content
          0.04
          %
          Melt Temperature
          270 - 300
          °C
          Nozzle Temperature
          265 - 300
          °C
          Front - Zone 3 Temperature
          265 - 300
          °C
          Middle - Zone 2 Temperature
          260 - 300
          °C
          Rear - Zone 1 Temperature
          260 - 300
          °C
          Mold Temperature
          60 - 90
          °C
          Back Pressure
          0.3 - 0.7
          MPa
          Screw Speed
          40 - 70
          rpm
          Shot to Cylinder Size
          40 - 80
          %
          Vent Depth
          0.038 - 0.076
          mm

          與塑擎合作

          您將會得到更成熟專業的工程塑料供應服務。我們以客戶至上,同時也積極挑戰,力求呈現最好的服務質量給廣大客戶。

          工程塑料熱線:

          400-6700-720
          020-38937005

          關于塑擎:
          东京一本一道一二三区,最新国产免费AV片在线观看,无遮无码免费裸交视频,美女裸体无遮挡18禁尤物