<sub id="qgjub"><listing id="qgjub"><small id="qgjub"></small></listing></sub>
        <form id="qgjub"><th id="qgjub"></th></form>
        <var id="qgjub"></var>
        <nav id="qgjub"><listing id="qgjub"></listing></nav>

        <button id="qgjub"></button>
        <form id="qgjub"><pre id="qgjub"><noscript id="qgjub"></noscript></pre></form>
        1. 全國咨詢服務熱線:400-6700-720 / 020-38937005

          熱門關鍵詞: cycoloy pc/abs-XCY620-BK1005 GELOY PC/ASA HRA222 Victrex PEEK 450CA30

          當前位置:主頁 > 產品中心 > PC > LEXAN > pc-lexan >

          Sabic Lexan PC EXL9330-BK1A068

          2016-11-14 09:20

          Lexan PC EXL9330物性

          -60℃延展性,紫外穩定.耐燃性V-0/5VA. 非鹵化,不含溴.

          Property

          TYPICAL PROPERTIES (1)
          MECHANICAL
          Value Unit Standard
          Tensile Stress, yld, Type I, 50 mm/min
          590
          kgf/cm2
          ASTM D 638
          Tensile Stress, brk, Type I, 50 mm/min
          620
          kgf/cm2
          ASTM D 638
          Tensile Strain, yld, Type I, 50 mm/min
          6
          %
          ASTM D 638
          Tensile Strain, brk, Type I, 50 mm/min
          130
          %
          ASTM D 638
          Tensile Modulus, 50 mm/min
          21400
          kgf/cm2
          ASTM D 638
          Flexural Stress, yld, 1.3 mm/min, 50 mm span
          900
          kgf/cm2
          ASTM D 790
          Flexural Modulus, 1.3 mm/min, 50 mm span
          21000
          kgf/cm2
          ASTM D 790
          Tensile Stress, yield, 50 mm/min
          55
          MPa
          ISO 527
          Tensile Stress, break, 50 mm/min
          60
          MPa
          ISO 527
          Tensile Strain, yield, 50 mm/min
          6
          %
          ISO 527
          Tensile Strain, break, 50 mm/min
          125
          %
          ISO 527
          Tensile Modulus, 1 mm/min
          2100
          MPa
          ISO 527
          Flexural Stress, yield, 2 mm/min
          85
          MPa
          ISO 178
          Flexural Modulus, 2 mm/min
          2200
          MPa
          ISO 178
          Hardness, H358/30
          90
          MPa
          ISO 2039-1
          IMPACT
          Value Unit Standard
          Izod Impact, notched, 23°C
          81
          cm-kgf/cm
          ASTM D 256
          Izod Impact, notched, -30°C
          69
          cm-kgf/cm
          ASTM D 256
          Izod Impact, notched, -50°C
          59
          cm-kgf/cm
          ASTM D 256
          Izod Impact, notched, 23°C, 6.4mm
          65
          cm-kgf/cm
          ASTM D 256
          Izod Impact, double-gated, 23°C
          108
          cm-kgf/cm
          SABIC Method
          Instrumented Impact Total Energy, 23°C
          539
          cm-kgf
          ASTM D 3763
          Izod Impact, unnotched 80*10*3 +23°C
          NB
          kJ/m2
          ISO 180/1U
          Izod Impact, unnotched 80*10*3 -30°C
          NB
          kJ/m2
          ISO 180/1U
          Izod Impact, notched 80*10*3 +23°C
          70
          kJ/m2
          ISO 180/1A
          Izod Impact, notched 80*10*3 -30°C
          55
          kJ/m2
          ISO 180/1A
          Izod Impact, notched 63.5*12.7*3.2, 23°C
          80
          kJ/m2
          ISO 180/4A
          Izod Impact, notched 63.5*12.7*3.2, -30°C
          65
          kJ/m2
          ISO 180/4A
          Charpy 23°C, V-notch Edgew 80*10*3 sp=62mm
          75
          kJ/m2
          ISO 179/1eA
          Charpy -30°C, V-notch Edgew 80*10*3 sp=62mm
          60
          kJ/m2
          ISO 179/1eA
          Charpy 23°C, Unnotch Edgew 80*10*3 sp=62mm
          NB
          kJ/m2
          ISO 179/1eU
          Charpy -30°C, Unnotch Edgew 80*10*3 sp=62mm
          NB
          kJ/m2
          ISO 179/1eU
          THERMAL
          Value Unit Standard
          Vicat Softening Temp, Rate B/50
          142
          °C
          ASTM D 1525
          HDT, 0.45 MPa, 3.2 mm, unannealed
          134
          °C
          ASTM D 648
          HDT, 1.82 MPa, 3.2mm, unannealed
          120
          °C
          ASTM D 648
          HDT, 1.82 MPa, 6.4 mm, unannealed
          124
          °C
          ASTM D 648
          CTE, -40°C to 40°C, flow
          6.66E-05
          1/°C
          ASTM E 831
          CTE, -40°C to 40°C, xflow
          6.66E-05
          1/°C
          ASTM E 831
          CTE, 23°C to 80°C, flow
          7.2E-05
          1/°C
          ISO 11359-2
          CTE, 23°C to 80°C, xflow
          7.7E-05
          1/°C
          ISO 11359-2
          Ball Pressure Test, 125°C +/- 2°C
          PASSES
          -
          IEC 60695-10-2
          Vicat Softening Temp, Rate B/50
          140
          °C
          ISO 306
          Vicat Softening Temp, Rate B/120
          142
          °C
          ISO 306
          HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm
          135
          °C
          ISO 75/Be
          HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm
          124
          °C
          ISO 75/Ae
          Relative Temp Index, Elec
          125
          °C
          UL 746B
          Relative Temp Index, Mech w/impact
          115
          °C
          UL 746B
          Relative Temp Index, Mech w/o impact
          120
          °C
          UL 746B
          PHYSICAL
          Value Unit Standard
          Specific Gravity
          1.18
          -
          ASTM D 792
          Mold Shrinkage, flow, 3.2 mm
          0.4 - 0.8
          %
          SABIC Method
          Mold Shrinkage, xflow, 3.2 mm
          0.4 - 0.8
          %
          SABIC Method
          Melt Flow Rate, 300°C/1.2 kgf
          10
          g/10 min
          ASTM D 1238
          Density
          1.19
          g/cm2
          ISO 1183
          Water Absorption, (23°C/sat)
          0.35
          %
          ISO 62
          Moisture Absorption (23°C / 50% RH)
          0.15
          %
          ISO 62
          Melt Volume Rate, MVR at 300°C/1.2 kg
          9
          cm210 min
          ISO 1133
          ELECTRICAL
          Value Unit Standard
          Dielectric Strength, in oil, 3.2 mm
          17
          kV/mm
          ASTM D 149
          Relative Permittivity, 50/60 Hz
          2.95
          -
          ASTM D 150
          Relative Permittivity, 1 MHz
          2.9
          -
          ASTM D 150
          Dissipation Factor, 50/60 Hz
          0.0024
          -
          ASTM D 150
          Dissipation Factor, 1 MHz
          0.0085
          -
          ASTM D 150
          Hot Wire Ignition {PLC)
          1
          PLC Code
          UL 746A
          High Ampere Arc Ign, surface {PLC}
          0
          PLC Code
          UL 746A
          Comparative Tracking Index (UL) {PLC}
          3
          PLC Code
          UL 746A
          Volume Resistivity
          >1.E+15
          Ohm-cm
          IEC 60093
          Surface Resistivity, ROA
          >1.E+15
          Ohm
          IEC 60093
          Dielectric Strength, in oil, 3.2 mm
          16
          kV/mm
          IEC 60243-1
          Relative Permittivity, 50/60 Hz
          2.6
          -
          IEC 60250
          Relative Permittivity, 1 MHz
          2.7
          -
          IEC 60250
          Dissipation Factor, 50/60 Hz
          0.001
          -
          IEC 60250
          Dissipation Factor, 1 MHz
          0.008
          -
          IEC 60250
          Comparative Tracking Index
          225
          V
          IEC 60112
          FLAME CHARACTERISTICS
          Value Unit Standard
          UL Recognized, 94V-0 Flame Class Rating (3)
          1.49
          mm
          UL 94
          UL Recognized, 94-5VA Rating (3)
          2.99
          mm
          UL 94
          Glow Wire Flammability Index 960°C, passes at
          1
          mm
          IEC 60695-2-12
          Glow Wire Ignitability Temperature, 1.0 mm
          825
          °C
          IEC 60695-2-13
          Oxygen Index (LOI)
          35
          %
          ISO 4589
          UV-light, water exposure/immersion
          F1
          -
          UL 746C

          Processing

          Parameter
          Injection Molding
          Value Unit
          Drying Temperature
          120
          °C
          Drying Time
          3 - 4
          hrs
          Drying Time (Cumulative)
          48
          hrs
          Maximum Moisture Content
          0.02
          %
          Melt Temperature
          295 - 315
          °C
          Nozzle Temperature
          290 - 310
          °C
          Front - Zone 3 Temperature
          295 - 315
          °C
          Middle - Zone 2 Temperature
          280 - 305
          °C
          Rear - Zone 1 Temperature
          215 - 295
          °C
          Mold Temperature
          70 - 95
          °C
          Back Pressure
          0.3 - 0.7
          MPa
          Screw Speed
          40 - 70
          rpm
          Shot to Cylinder Size
          40 - 60
          %
          Vent Depth
          0.025 - 0.076
          mm

          與塑擎合作

          您將會得到更成熟專業的工程塑料供應服務。我們以客戶至上,同時也積極挑戰,力求呈現最好的服務質量給廣大客戶。

          工程塑料熱線:

          400-6700-720
          020-38937005

          關于塑擎:
          东京一本一道一二三区,最新国产免费AV片在线观看,无遮无码免费裸交视频,美女裸体无遮挡18禁尤物